An innovative concrete & waterproof solutions

DAMP HEALER SEALER

डैम्प हीलर सीलर

Epoxy based high performance damp wall waterproof system with 3 components.

Where damp healer sealer can be used ?

Damp healer sealer will use on all plaster walls & cementitious damp surface:

Features

MIXING PROPORTION

iT IS 3 COMPONENT PRODUCT CONSISTS OF PART-A : BASE , pART-B : hARDENER , PART-C : FILLER

FOR PREPARING A MIX OF 1 KG, BELOW PROPORTION TO BE FOLLOWED

PART-a (BASE) = 200GM

PART-B (HARDENER) =100GM

PART-C (FILLER) = 700GM

DIRECTION OF USE

Step 1- where damp healer sealer can be used

Damp Healer Sealer will be used on all Plaster walls & Cementitious Damp Surfaces

STEP 2- SURFACE PREPARATION

Remove all damage layers ( like existing Paints,Putty & POP) with Putty Knife or surface grinder to get sound Plaster surfaces.

Applied area must be clean with air blower before application of Healer Sealer 007

STEP 3 - METHOD OF APPLICATION

After surface preparation apply HS007 Crystalline coating on affected areas and let touch to dry before application of Damp healer sealer

Now mix damp healer sealer in proper proportion to get putty consistency and apply with putty blade on affected areas.

Lets dry Damp Healer sealer for 24 hrs before using any Paint on it.

On Treated area further putty is not required.

This product is used for Treating the Damp walls due to continuous seepages. Dampness results in damaging the existing paint,putty or even plaster also, which further harms the structure as well. Due to Continuous Dampness bad smell occurs which results in growth of bacteria and harmful organisms.

PROPERTIES	RESULT
Appearance	Part A ( Base) - white viscous Liquid , Part B( Hardener)- Yellow viscous Liquid, Part C( Filler) -White Powder
Mixing Ratio	200(base)+100(Hardener)+700(Filler)
Material Consistency	Smooth Creamy Paste
Mixed Density	1.75+/-0.05 kg/lit
Pot Life	60 minutes
Joint width	2-15mm
Sag Resistant	No sag
Application Temperature	+10 deg C to + 35 deg C
Light Foot Traffic	24 hours
Regular Traffic	3 days

PERFORMANCE PROPERTIES

Compressive Strength after 7 days	>50 Mpa
Flexural Strength after 7 days	>30 Mpa
Shear adhesion strength after 14 days	>=30KN
Water absorption	< 0.5g
Pull off Adhesion strength	> 1.5Mpa
Total VOC content	< 8gm/kg

(Q.) What is Damp Healer Sealer?
(A.) Damp Healer Sealer is a highly effective treatment for dampness of the Walls and Ceilings.

(Q.) Where it can be used?
(A.) Damp Healer Sealer Can be used for all plaster walls and Cementitious Damp Walls.

(Q.) What are the Product Components?
(A.) It is a 3 component product which includes Part A (Base) – Liquid Form, Part B (Hardener) – Liquid Form, Part C (Filler) – Powder Form.

(Q.) What is the proportion of Mixing?
(A.) To get a Consistent paste, Proportion shall be Part A (Base) – 200 gm + Part B (Hardener)-100gm + Part C (Filler)-700gm for 1 kg material.

(Q.) Is there any need for Putty Application after Damp Healer Sealer?
(A.) No, if applied Properly, there is no need for further putty application.

(Q.) What is the Drying period?
(A.) Minimum 24 hrs after application of Damp Healer Sealer, further application can be applied.

(Q.) What are the SKU available?
(A.) 1kg & 5kg pack.

Our Other Products & Solutions

With our revolutionary product, Healer Sealer we offer a breakthrough crystalline technology that enhances the workability, permeability, and durability of the concrete.