An innovative concrete & waterproof solutions


रेन हिलर सीलर

Acrylic co-polymers waterproof, heatproof & fire retardant membrane/coating
  • RAIN HEALER SEALER, is pure elastomeric high build solar heat reflecting eco- friendly membrane for VERTICAL and EXTERIOR WALLS. The cooling effect is designed with high quality titanium dioxide pigment which reflects more than 80% of solar radiation and specialty micronized ceramic additives which reduces heat transmission inside the room.
  • The cured EXTERNAL WALLS membrane has outstanding elasticity and very high tensile strength to accommodate WALL movement. A very high shore hardness coupled with excellent adhesion to concrete and metal surfaces makes RAIN HEALER SEALER ideal choice for all types of EXTERIOR substrates.


Heat proof>10-12 ©, which reflects more than 80% solar radiation & gives you cooler experience ever

Fire proof, It reduces flammability and combustion of building

Waterproof, no more seepage & leakage

Energy Saver, it reduces energy cost approximately 30%.

Upto 10 Years of protection

Non toxic, water base & solvent free

Rain Healer Sealer - Weatherproof Paint

  • Weatherproof, protective and decorative.
  • Easy to apply, solvent free, one component system and can be used on concrete, light weight concrete, PU foam, asbestos, cement, Zinc, GI Steels, Timber etc.
  • Excellent adhesion to concrete surfaces while allowing concrete to breathe moisture naturally.
  • Highly flexible, can absorb extreme temperature variations / roof traffic without cracking or tearing & Excellent thermal insulation.
  • Highly resistant to chemicals & anti carbonation coating and resistant properties.
  • UV Rays resistant, reflecting more than 80% of solar radiation. Low Labor Costs, Minimum surface preparation needed Non-toxic-ideal for potable water tanks.
  • Damp proof - Excellent for damp-proofing structures.
  • Good resistance to Carbon dioxide and Chloride ion diffusion.
  • Save energy and utility costs UPTO 30% by maintaining temperature inside the room Easy application; can be applied by brush, roller and squeegee at site.
  • Elastomeric in nature; up to 2mm crack bridging capacity.

  • Preparation: All the surfaces which are to receive RAIN HEALER SEALER, must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with Healer Sealer Quick-roc System if needed.
  • Application: All cracks (which greater than 2mm) must be thoroughly repaired with CRACK HEALER SEALER. Then prime the surface with RAIN HEALER SEALER diluted with 30-50% water. RAIN HEALER SEALER shall be applied in two coats at right angles to each other by brush, roller or spray. The second coat of RAIN HEALER SEALER shall applied as soon as the first coat has reached touch dry state (4-6 hours) as it is without any dilution.

  • RAIN HEALER SEALER finds application on a variety of EXTERIOR substrates including CONCRETE WALLS, BRICK WALLS, ON PLASTER, PARAPET & EXPOSED SURFACES etc.
  • RAIN HEALER SEALER is used for heat insulation paint and waterproofing for EXPOSED VERTICAL AAPLICATION, both for new as well as old buildings.
  • RAIN HEALER SEALER can be on surfaces prone to heat and fire to reduce fire risks
  • RAIN HEALER SEALER will increase the life of concrete structures up-to 10-15 years and provide best quality to cost ratio in the industry.
  • RAIN HEALER SEALER will prevent reinforcing steel from chemical attacks.

Appearance Emulsion paint(white base )
Nature Single Component
Specific Gravity 1.27-1.29
Elongation at break 350%
Water Permeability 80% reduction in water penetration @7.5bar pressure
Chloride ion penetration Very low
Algae & fungal growth No Growth
Weathering No defects
Tensile Strength >2.9 N/mm2
Crack bridging capacity more than 2.2mm width
Adhesion strength,N/mm2 1.75
coating thickness 160 micron (in two coat)


(Q.) What is the use of rain healer sealer?
(A.) Rain healer sealer will use as exterior high durable weatherproof emulsion paint.

(Q.) What is the application area for rain healer sealer?
(A.) It can be used for Exterior Paintings.

(Q.) What properties does rain healer sealer have?
(A.) It is waterproof, heat proof & fire proof

(Q.) Do primer needs to be applied before rain healer sealer coat?
(A.) Rain healer sealer is a self-priming product acts as a primer in first coat and paint in the 2nd & 3rd coat when stainer is mixed in it.

(Q.) How many color shade available?
(A.) Currently we offer 1008 shades from our fandec book and digital shade card on website.

(Q.) Do any additional waterproof coat required before rain healer sealer application?
(A.) No need of any additional coat, rain healer sealer will itself have waterproofing properties.

(Q.) What is the coverage of rain healer sealer?
(A.) Coverage of rain healer sealer as a self-primer is approx. 120-130 sqft/liter in single coat with 30% dilution and approx.65-75 sqft/lit in 2 coats undiluted.

(Q.) Can rain healer be applied on damp walls?
(A.) No, first treatment for damp wall required from our Damp Healer Sealer material, then after treatment Rain Healer Sealer can be applied.

(Q.) What is the proportion of mixing in each coat?
(A.) Rain healer sealer application required minimum 3 coats- 1st coat as primer and 2nd & 3rd coat as paint- in 1st coat 30% dilution can be done in 20 lit bucket, 2nd & 3rd coat requires direct application without dilution.

Our Other Products & Solutions

With our revolutionary product, Healer Sealer we offer a breakthrough crystalline technology that enhances the workability, permeability, and durability of the concrete.

With our revolutionary product, Healer Sealer we offer a breakthrough crystalline technology that enhances the workability, permeability, and durability of the concrete.